Careers

If you are looking to join our team, simply download our virtual application and fill it out on your electronic device. After you have completed the application, upload it using the form at the bottom of this page to submit it to our recruiter.Thank you!

Submit an Application ‎‎‎‎‎‎‎‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏ ‎❯

Current Open Positions:

  • Security System Installer

    Duties and Responsibilities:

    • Install and service security systems and cameras and access control
    • Ability to work under general supervision and independently at multiple customer sites on a daily basis and interpret and design system layout to meet the customer needs
    • Ability to understand and apply codes, rules, standards and requirements to meet specifications
    • Perform system inspections for proper operation 
    • Follow safety practices to safeguard against injury and damage to property 
    • Follow electrical blueprints and SOW
    • Communication skills including verbal and written skills
    • Communicate with customers and be able to train system once installed
    • Ability to logically solve basic to moderately difficult problems with effective solutions and demonstrates troubleshooting techniques
    • Ability to operate hand and power tools

    Minimum Job Requirements: 

    • High school diploma or equivalent.
    • Current valid State Driver's License.
    • Certifications and security alarm licensing a plus
    • Completes per-requisite and ongoing safety requirements and courses, driver care requirements, technical standards, and any other applicable training.
    • Follows safety standards and reports safety concerns in a timely manner.
    • Obtain signatures on work orders from customers in accurate and timely manner.

    Ideal Experience: (Not Required)

    • Installation experience in commercial security systems for systems of all levels
    • Alarm Experience - Access control systems Bosch, Paxton, Kantech, and or equivalent. - Bosch, Honeywell, DSC, and or equivalent.

    Physical Demands:

    • Ability to climb and descend a ladder up to 20 feet.
    • Ability to climb stairs.
    • Ability to operate a mechanical lift system and ascend up to 40 feet.
    • Ability to lift and move up to 50 pounds.
  • Electrical Service Technician

    ELECTRICAL SERVICE TECHNICIAN

    Recore Electrical Contractors, Inc. is currently in search of Electrical Service Technicians to join our team! 


    ESTs will spend their days servicing, repairing, and installing electrical systems in commercial and industrial environments. Recore is looking for ESTs who can use their technical expertise and individual judgment to resolve customer electrical issues in a highly professional and safe manner.



    Job Responsibilities

    • Install, connect, test, and maintain electrical systems for a variety of purposes, including lighting, climate control, and various power distribution systems.

    • Work with blueprints when installing electrical systems in industrial and commercial facilities.

    • Able to indicate on blueprints the location of circuits, outlets, load centers, panel boards, and other equipment.

    • Install new electrical equipment.

    • Installing and Bending of EMT and Rigid conduit.

    • Maintain and repair electrical systems as quickly as possible in order to minimize inconvenience.

    • Able to replace items such as circuit breakers, fuses, switches, electrical and electronic components, or wire.

    • Perform the installation of various electrical systems per NEC state/local regulations and complete construction documents while maintaining the highest levels of OSHA compliance.

    • Review specifications, blueprints, and job scope for technical accuracy.

    • Perform electrical testing and system monitoring, and recommend necessary improvements/repairs.

    • Maintains good housekeeping, which may include, sweeping the work area with a broom, organizing tools and materials, and keeping surfaces clean.


    Job Requirements

    • 2 years of electrical industrial and/or commercial service experience.

    • Perform troubleshooting on both analog and digital circuitry.

    • High degree of skill at analyzing problems and developing solutions.

    • Safely work on electrical and electronic systems up to 480v.

    • Operate most electronic test equipment.

    • Read and analyze schematics.

    • Skilled in hand and power tools.

    • Basic knowledge of computer systems, Microsoft programs, and interfaces.

    • Perform in office and manufacturing environments.

    • Ability to take direction and work independently.

    • Ability to work at heights, and lift up to 50 lbs.

    • Ability to walk, climb, lift, squat, crawl, and reach overhead to complete certain tasks.


    Job Type: Full-time


    Benefits:

    • 401(k)

    • 401(k) matching

    • Dental insurance

    • Disability insurance

    • Health insurance

    • Life insurance

    • Paid time off

    • Vision insurance



  • Engineering Technician

    Engineering Technician – Robust benefits package and top pay!


    We have a growth opportunity for a skilled and innovative engineering technician. Qualified

    individuals will join an expanding team of engineers, technicians, and designers who offer a full spectrum of services to industrial and manufacturing clients throughout the southeastern US.


    Ideal candidate qualifications/ skills include:

    • Associate degree in engineering technology or 5 years of relevant experience
    • Trained in the National Electric Code and the National Electric Safety Code
    • OSHA 30 certification, or ability to obtain certification
    • Lock-Out-Tag-Out certification, or ability to obtain certification
    • Certified Power Quality Professional or similar certification
    • Level 2 Certified Thermographer, or ability to obtain certification
    • Certified Arc Flash Trainer, or ability to obtain certification
    • Licensed as an electrical contractor or possess the ability to become licensed

    Skills Required:

    Prepare and deliver technical presentations

    Read and understand electrical schematics

    Gather field electrical data and document findings

    Install and operate power monitoring equipment

    Operate ground field testing and ground continuity equipment

    Operate insulation resistance cable testing equipment

    Operate digital field location layout tools

    Perform short circuit and arc flash software analysis

    Prepare thermography analysis

    Prepare LOTO procedures

    Generate and affix electrical equipment labeling

    Prepare reports for clients

    Prepare material and labor estimates to generate service proposals

    Maintain test equipment calibration records

    Position Requirements

    Entrepreneur mindset

    Organized, with attention to detail

    Professional communication skills, both written and verbal

    Follow projects to completion

    Time management

    Travel to client sites and work in industrial/manufacturing facilities

    Occasional overnight stays

    Occasional evening and weekend work


    Recore is an employee-owned company and offers the following benefits for future

    engineering team members:

    • Use of company vehicle
    • Company credit card
    • Comprehensive healthcare coverage
    • Life insurance
    • 401K
    • PTO
    • Dental Insurance
    • Vision Insurance
    • ESOP shares program
    • Position related training
    • Job-related tools and equipment

  • Trimble/Hilti Field Layout Tech

    Trimble/Hilti Field Layout Tech


    Robust benefit package and top pay!



    Job Description:

    • Review project documents.
    • Understand the objections of the site survey and provide horizontal and vertical control using Total Stations.
    • Participate in basic layout and field engineering activities.
    • Establish control lines from control points.
    • Layout formwork such as columns and walls.
    • Layout required embeds block-outs and other items required by contract.
    • Assist in the performance of a variety of surveying activities.
    • Provide clerical support and documentation of engineering activities.
    • Maintain proper usage and storage of all surveying equipment.
    • Contribute to the team effort by accomplishing related assignments as needed.
    • Working during inclement weather- could be exposed to extreme cold and heat, noise, and dust from construction operations depending upon the project site.


    Minimum Qualifications:


    MUST BE PROFICIENT in Trimble / Hilti Layout Tech & understand Field Layout of overhead and underground installations. MUST HAVE ELECTRICAL BACKGROUND.

    Minimum of one year of experience in field engineering/layout.

    Good communication skills – written, verbal, and interpersonal.

    Extensive travel of up to 70%.

    Proficient at reading and understanding blueprints, including but not limited to both structural and architectural drawings, with the ability to cross-check between the two documents as needed.

    Ability to meet deadlines and multi-task in a fast-paced environment

    Bilingual Spanish/English preferred.

    Possess knowledge of construction field engineering from pre-construction to completion, preferred.



    Job Type: Full-time


    Benefits:

    • 401(k)
    • 401(k) matching
    • Dental insurance
    • Disability insurance
    • Health insurance
    • Paid time off
    • Vision insurance

    Location:

    Gastonia, NC: Reliably commute or planning to relocate before starting work

    (Required)

  • BIM Modeler

    Recore Electric is seeking a BIM Modeler to support the Recore Electrical engineering team. (This is not a remote position)


    The BIM Modeler is responsible for maintaining one or more project BIM models and the associated project BIM support documents, to ensure the quality levels satisfy specific project BIM requirements and the Recore Electrical BIM standards. Core responsibilities of the BIM Modeler role will span from initial project set-up, ensuring BIM models remain free from errors, to managing outputs and performing BIM coordination exercises.


    The BIM Modeler provides technical support directly to project teams and reports directly to the BIM Manager, providing feedback on project teams requirements for training, workflows or content.


    Technical Skills:

    • Knowledge of and proven practical background in Autodesk Revit and related CAD software.
    • Experience in model federation workflows using Navisworks.
    • Solid understanding of core ANSI drafting standards.
    • Familiarity with design practices relating to the electrical field.

    Skills and Qualifications:

    • Candidates must be able to clearly articulate advanced concepts in a way that team members at all levels can understand.
    • Candidates should possess the ability to teach others to understand and use BIM concepts and tools.
    • Degree in computer aided drafting or electrical engineering/technology preferred but not required.
    • Excellent verbal and written communication skills with strong attention to details is a must.
    • The ideal candidate must be a team player that has passion for their work.

    Experience:

    • Candidates must possess at least 1 year of relevant experience with Autodesk Revit.
    • Electrical experience is preferred but not required.

    Job Type: Full-time

    Salary: $55,000.00 - $90,000.00 per year


    Benefits:

    • 401(k)

    • Dental insurance

    • Employee discount

    • Flexible schedule

    • Health insurance

    • Paid time off

    • Retirement plan

    • Vision insurance


    Schedule:

    • 10 hour shift

    • 8 hour shift

    • Monday to Friday


    Work setting:

    • In-person


    Ability to commute/relocate:

    • Charlotte, NC: Reliably commute or planning to relocate before starting work (Required)


    Experience:

    • Revit: 1 year (Required)


    Work Location: In person


  • Field Technician (Industrial Automation & Controls)

     Industrial Automation and Controls Field Technicians troubleshoots and maintains automated manufacturing equipment. Installs, maintains, configures, and troubleshoots electronic components on manufacturing equipment. Installs, programs, and repairs programmable controllers (PLC’s) and others types of controllers. Technicians work in an industrial work environment.  


    Responsibilities:

    • Maintain, modify, and upgrade PLC's
    • Install, program, or calibrate analytical instrumentation, scales, VFD's and/or PLC's
    • Troubleshoot industrial, plant automation equipment networks, sensors, motor control.
    • Installation and in-house and field technical support of PLC based control systems.
    • Develop electrical hardware design and functionality of control systems
    • Perform all aspects of start-up and commissioning of the control system
    • Debug completely the developed and installed software packages
    • Ensure all changes and modifications are appropriately documented
    • Minimum Experience Requirements:
    • Post high school education or trade school required as a minimum
    • Trade school curriculum to include electronics, electricity, solid state, motor controls, and industrial computing subjects
    • Comfortable and effective with clients and contractors as direct interface
    • Being mechanically inclined with a knowledge of using common mechanics tools.

    Preferred Experience:

    • 2 years or more of prior field experience with automation or motor controls
    • Understanding of and ability to troubleshoot and repair industrial electrical system components such as motors, variable AC drives, PLCs, and field sensors.
    • Ability to read and use mechanical and electrical schematics for troubleshooting.

    APPLY

  • Industrial Electricians and Top Helpers

     Electricians are responsible for installing, maintaining, testing, troubleshooting and repairing industrial electrical systems. Primarily accountable for interpreting electrical drawings, schematics, and code to ensure proper functioning of electrical systems. Electricians work in an industrial work environment. 


    Duties may vary depending on experience level:

    • Accurately install conduit, wire, pre-fab assemblies, panel boards, light fixtures, devices, and other equipment per layout.
    • Follow blueprints and schematics during installation process.
    • Measure, cut, thread, ream, assemble, and install conduit.
    • Test continuity of circuits, circuit wiring to ensure compatibility and safety of components using test instruments.
    • Observe functions of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement.
    • Follow state and local building regulations based on the National Electric Code during installation process.

    Requirements:

    • 1 years of electrical experience working in industrial settings
    • Being able to accurately read blueprints and schematics (Not a requirement for Helpers)
    • Have basic hand tools
    • Familiarity with NEC Standards and electrical codes
    • Reliable transportation
    • Ability to work from ladders, lifts, and carry at least 50lbs at a time

    APPLY

  • Assistant Project Manager

    Recore Electrical Contractors is seeking an Assistant Project Manager. Assistant Project Manager is responsible for helping Project Managers in the planning, directing, and coordinating industrial electrical projects. The Assistant will be working closely with Project Managers assisting with daily tasks such as coordination of projects, submittals, RFIs, estimates, and various other duties.


    This is intended to be an entry-level position for someone who is looking to start a career in electrical project management. Ideal candidates for this position have recently graduated with a Construction Management degree, or have equivalent work experience in Project Management. Having prior industrial electrical experience of course is a huge plus.


    Duties and Responsibilities may include but are not limited to:

    • Assist in the organization and management of various industrial electrical projects.
    • Assist in the financial projections 
    • Assists the project staff to outline work-plan and assigning duties, responsibilities, and scope of authority
    • Helps in coordinating activities of project personnel to ensure the project progresses on schedule and within the prescribed budget
    • Assists in preparing status reports prepared by project personnel and modifies schedules or plans as required
    • Assists in the preparation of project reports for management, client, or others
    • Assists with project personnel to provide technical advice and resolve the problem
    • Assists the onsite superintendent with duties specific to the project
    • Assists in maintaining a viable and positive relationship with the customer
    • Must be able to handle stress and job demands.
    • Must be able to cooperatively work with others.

    Experience:

    • College graduate with a construction-related degree, or equivalent work experience with a High School Diploma or GED.
    • Detail-oriented professional with exceptional problem-solving skills who loves new challenges and has a drive for results.
    • Strong communication and organizational skills with
    • Proficient in MS Office (Outlook, Excel, Word)
    • Current driver's license and have transportation to the office
  • Industrial Electrical Foreman

    Job Responsibilities:

    • Work with Project Managers, Customers, and other types of management to plan, organize, and direct the work of job crew employees daily
    • Maintain familiarity with plans, specifications, and job folder contract scope
    • Plan layout and installation of same in accordance with job specifications
    • Attend coordination meetings as required and provide necessary information
    • Receive and review weekly job assignments
    • Complete a detailed list of all required materials, tools, and manpower for job assignments and communicate requirements with the direct Project Manager
    • Assist in the monitoring and documentation of the progress of the job using appropriate forms and procedures as directed by the Project Manager.
    • Provide the workforce with current and accurate information as generated by the Project Manager, including RFI's, memorandums, and any other forms of communication devices
    • Assist in the communication of company policies and procedures to the job crew
    • Apply knowledge of the National Electrical Codes as needed
    • Order daily materials as needed for your work area and follow up on backorders as necessary through the Project Manager.
    • Monitor and track employee work time as necessary and assist the Project Manager and workforce in the proper coding of time cards as required
    • Be available to the team for any questions regarding tasks being performed
    • Ensure the job site is properly cleaned up at the end of each workday
    • Ensure compliance with all job safety standards established by all regulatory agencies.
    • Responsibly manage assigned truck, tools, and equipment.

    Skills and Qualifications:

    • At least 2 years of electrical supervision experience in an Industrial setting.
    • Able to perform professional installation in an Industrial setting.
    • Able to lead/work and manage 1-5 men in an industrial setting.
    • Able to interpret and implement blueprint specifications.
    • Should have mechanical aptitude.
    • Must understand and perform required math functions.
    • Must Possess a valid driver’s license or the ability to transport to and from assigned job sites.
    • Knowledgeable of National Electric Code and comply with State and local building codes during the installation of electrical systems.
    • Capable of laying out conduit, cable tray, or wire trough and trapeze systems.
    • Capable of connecting basic control systems. (Start-stop, E-stop, motor starters)
  • Low Voltage Estimator

    Job Description:

    We are currently searching for an Estimator to be a part of our Communication and Security Systems Division. Our Communication and Security systems Division installs and services commercial intrusion systems, access control systems, CCTV Surveillance systems, gate systems, data cabling, and fiber cabling. The Estimator will work as a member of a team to prepare detailed takeoffs, counts, and scope summaries (Prebid and Post bid).


    The job duties for this position include but not limited to:

    • Review and interpret project documents including drawings/blueprints/sketches, specifications, and contract language.
    • Identify labor, material, and time requirements to perform work.
    • Prepare detailed takeoffs, counts, and scope summaries.
    • Aid in product research and data entry.

    Requirements:

    • Proficiency in Excel and Word.
    • Willingness and ability to visit job sites and facility tours.
    • Excellent verbal and written communication skills.
    • Time management and organizational skills.
    • Ability to work with a team or independently.
    • Working Knowledge of commercial or industrial low voltage systems.
    • Knowledge and understanding of industry applications; ability to read and understand drawings and specifications.
    • Must possess a valid driver's license

    Preferred Experience:

    • 1-2 years of construction estimating.
    • Prior work with on-screen take-off software.
  • Electrical Project Manager

    Role Description:

    The Project Manager (PM) is the heart of the project team at Recore Electric. A project manager oversees multiple projects from conception to final project closeout. Throughout the life of a project a PM will be involved in every aspect of the project including design, estimating, scheduling, and above all else, ensuring the safety and quality on projects aren’t just up to industry standards, but are up to Recore standards.


    Role Responsibilities:

    • Work with pre-construction to determine and define scope of work
    • Estimate and acquire resources needed to complete the project.
    • Obtain necessary permitting and other regulatory requirements
    • Manage material procurement and tracking
    • Manage the schedule and budget to ensure the success of the project
    • Select and manage subcontractor and vendor relationships
    • Issue schedule and budget updates as needed
    • Coordinate information between architects, engineers, and subcontractors
    • Ensure all work is being completed in compliance with local building codes
    • Review and establish all contracts, subcontracts and change order

    Minimum Qualifications:

    • Proven experience successfully managing multiple projects
    • 2 years in a Project Management role within the construction industry
    • Thorough knowledge of NEC
    • Ability to read and understand drawings and blueprints
    • Ability to budget, schedule, negotiate and control job costs
    • Strong leadership and management skills
    • Detail oriented and highly organized
    • High degree of knowledge and familiarity regarding contract documents

    Preferred

    • PMP Certification
    • Bachelors or Associates degree in Construction Management or other construction focused degree
    • Knowledge of various construction software (Procore, Bluebeam, P6)
  • Fire Alarm Technician

    Recore Electrical Contractors is currently accepting applications for Fire Alarm Technicians for service and install work. These positions can be responsible for installing and servicing of Fire Alarm Systems in industrial and commercial environments. We are currently expecting applicants of varying experience levels working with Fire Alarm Systems. Ideal candidates for these positions have at least one years’ worth of experience working with Fire Alarm Systems.


    Duties: (May vary depending on experience)

    • Installation and service of Fire Alarm Systems.
    • Perform multiple tasks as instructed by supervisor/PM.
    • Perform all duties required to successfully complete projects within estimate and according to specifications
    • Respond to service requests, diagnose system malfunctions of fire alarms and adjust, repair or replace equipment as needed to bring into compliance;
    • Read blueprints and drawings;
    • Communicate effectively with team and contractors/customers.
    • Advanced coordination with job requirements and other trades.
    • Fill out requirement documentation in a timely manner.
    • Coordination of material ordering and scheduling.
    • Prepare job in a timely manner to pass inspections.
    • Enforcement of company policy.

    Requirements

    • Having at least 1 year of recent experience installing or servicing Fire Alarm Systems.
    • Being able to work independently as well as be a team player.
    • Being responsible, self-motivated, self-starter, personable, well-organized and able to work with minimal supervision.
    • Having exceptional customer service skills to deal with both internal and external customers.
    • Having ability to manage multiple tasks simultaneously.
    • Having the Interpersonal skills, and the ability to work with diverse groups.
    • Having the planning, organizing and implementing skills, which allow the successful completion of a project by a specific due date.
    • Being able to work overtime as required.
    • Being NICET certified is a huge plus, but is not required.

Submit Application:

Share by: